150L split pressurized best solar water heater

Best solar water heater Specification:

    Inner tank: SUS304-2B food grade stainless steel 1.2mm

   Outer tank :color steel 0.45mm size : Φ470 mm*1460 mm

  Tank insulation: high density polyurethane integrated foam 55mm

   Copper coil :12mm/1mm 15meters each coil

   Working pressure:6Bar

  Manifold case:Collector with black aluminum alloy 1.8mm manifolder

  Flow passage: Collector direct-flow header with High quality red copper Φ35*1.0mm, inlet & outlet Φ22mm

How does it works :

Split pressurized best solar water heater combined in three parts:tank ,solar collector and workstation. The collector absorbs solar energy and transmits it to the water tank through circulation. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically. The circulation pump makes heat-conducting liquid circulate automatically.Then the heat-conducting liquid transfers heat to water by heat exchanger in the tank to heat the water.

Why we declare it best solar water heater?

First, solar water heater system are split installed , solar collector is installed outside the door, the tank and workstation are inside door, it avoid rust and easy operate the controller.

Second, high effecient solar collector with heat pipe  which effecient higher than 10% than normal vacuum tube.

Besides ,the vacuum tubes can reach temperature to be boil.compair to the flat panel solar collector ,heat pipe vacuum tube solar collector can be used for commercial and industrial which demands high temperature.

Third, we do not need to do anything after installed.The controller can do the job for you. Monitor the temperature and control the system automatically work.

How to choose right split pressurized best solar water heater system： 

Here are three type system design for usage：

First type: Tank without coil. It is an economic design. The tank directly exchanges the hot water with solar collector by circulation pump which control by controller.

Second type: tank with one  copper coil, this coil is for the circulation between solar collector and water tank and circulation pipeline usually filling with anti-freeze fluid (glycol for example) as heat exchange media.

Third type : tank with two copper coils: one for collector and tank circulation, other one for heating equipment or space heating   (such as connect to gas/electric boiler , and for floor heating system). Solar circulation also request fluid as heat exchanger media.

To choose the right type of best solar water heater system and components:

We will suggest you to tell me the installation location, any existing heating equipment. And then I will make a design for you.

Attention : Resident type of split system  ranges from 100L to 1000L.

For the system usage you may need the following parts:

1.    Air vent : for a security suggest installed beside the solar collector

2.    Expansion tank choose

3.    Controller for system type one (tank without coil)

4.    Workstation (suggestion for tank with coils)

5.    Thermostat valve （for a constant hot water）

6.    Pipeline and insulation

7.    Fittings (for pipeline and system parts)

8.    Solar bolts and hooks (for solar collector fixing)

9.    Heat exchanger (for outside tank heat exchange)

10. Safety valve

11. Filling valve (easy filling fluid)

12. Motorized valve (change or close/open energy flow way)

13. PT valve

14. One-way valve

15.Magnesium bar