Solar water heater Chile With Copper Heat Exchanger

Solar water heater Chile is suitable for Chile market.With copper heat exchanger leads to high pressure for shower.The solar water heate with special heat pipe which direct contact water of the no pressure solar water heater tank makes high heat effeciency.

Detail of solar water heater Chile data as below.

Volume: 300 lts.

Insulation: 50 mm. Expanded polyurethane.

Exterior Cladding: Galvanized steel 0.4 mm thickness.

Pond Stainless Steel SUS 304-2B 0,5 mm. (Alimentary grade)

Maximum Working Pressure in the pond: Not pressurized 0.1 bar.

Maximum Working Pressure in Copper coil: 6 bar. / Pressure test at 12bar.

External diameter Pond: 460 mm.

Long Pond: 2540 mm.

30 tubes vacuum type Heat Pipe 1800 x 58 mm

How does solar water heater Chile work?

1.Heat pipe vacuum tube is the absorbing device to get solar energy from sun.

The heat will be absorbed and delivery by heat pressed heat pipe condesnor to exchange to the water in the tank.

2.The copper coil inside the tank will get the hot from tank water for people washing and shower.

3.The top with a assistant tank for keeping the main tank full all the time.And prevent there is no water in tank which would demage the silicone ring which contact with heat pipe condensor.

Compare to normal type solar water heater,Solar water heater Chile is more advantage.

1.The heat pipe has higher effeciency about 10% more than only tubes.

2.It is new design the heat pipe can directly complete with non-pressurized tank for working.

3.The copper coil for heat exchange device for shower can take pressurized water for comfortable purpose,clear water are make sure all the time.

4.small tank for filling makes automatically work ,set people free.