Heat Pressed Heat Pipe non-pressurized Chile Solar water heater

Chile solar water heater  is most popular in Chile market.

Volume: 300 lts.

Insulation: 50 mm. Expanded polyurethane.

Exterior Cladding: Galvanized steel 0.4 mm thickness.

Pond Stainless Steel SUS 304-2B 0,5 mm. (Alimentary grade)

Maximum Working Pressure in the pond: Not pressurized 0.1 bar.

External diameter Pond: 460 mm.

Long Pond: 2540 mm.

30 tubes vacuum type Heat Pipe 1800 x 58 mm

How Chile solar water heater works:

1.Heat pipe vacuum tube is the absorbing device to get solar energy from sun.

The heat will be absorbed and delivery by heat pressed heat pipe condesnor to exchange to the water in the tank.

2.hot water is directly get from the non-pressurized water tank

3.The top with a assistant tank for keeping the main tank full all the time.And prevent there is no water in tank which would demage the silicone ring which contact with heat pipe condensor.

The advantage of Chile solar water heater Compare to normal type solar water heater:

1.The heat pipe has higher effeciency about 10% more than only tubes.

2.It is new design the heat pipe can directly complete with non-pressurized tank for working.

3.tank design in non-pressurized,most economic compare to pressurized tank.

4.small tank for filling makes automatically work ,set people free.