wall mouted solar collector

Wall mounted solar collector is  a solar absorbor which adopts heat pipe evacuated tubes as heating device.Heat pipe evacucated tubes converts the solar radiations  into heat power to heat the fluid medium of the solar collector manifold and  use circulation pump for active thermal transfer to the solar water heater tank or other heat exchanger.While installation the solar collector , there may be not enough roof or stand free area. We design a special frame  which  buttom with  cross bars which can be wall mounted. It is a good solution for save the installation place.

Here is details of our Wall mouted solar collector.

Ø  Wall mounted solar collector manifold:

Outer shell:Aluminum alloy 1.6mm

Flow passage :Red copper 35 diameter ,1mm thickness

Ø  Hea pipe

Header:0.8mm thickness ,14mm diameter

          Body:0.6mm thickness ,8mm diameter

Ø  Heat preservation: Rock Wool clothes with Polyurethane foaming

Ø  Absorbing fins:single design ,aluminum alloy ,thickness 0.18mm

Ø  Tube :tripple selective coating ,double glass with evacuated ,Hail resistant 25mm; tubes size :58mm*1800mm

Ø  Frame:Aluminum 1.8mm,angel 60degree ,buttom with cross bars for firm and strong fixed.

Ø  Working pressure:6Bar

Ø  Anti-freezen:-35°C 

What's the wall mounted  solar collector and how it works?

Balcony mounted solar collector is a collecting machine which absorbs the sun energy to heating ,then supply hot water,space heating and even space cooling via used of an absorption chiller or dessicant cooler technology.It works under sun,the absorbing tubes convert the solar energy into heat energy and transfer heat to the heat pipes by aluminum fins,the liquid in the heat pipe turns into vapour and rieses to the condenser and release the energy to water or other liquid,the the heating liquid back to the bottom of  heat pipe and circulation again.

Focus abstract of wall mounted solar collector:

ü  Frame is designed special for  wall hanging

ü  Save the installation space

ü  Solve the problem who has no roof area for installation