15tubes pressurized solar collector panel with hooks for slop roof

Evacuated tube solar water heater is popular and acceptable by world customer cause of economic and high effeciency.And pressurized solar collector panel which is high pressure and suitable for cold area. It is much more effeciency than open loop solar water heater open. It is mould design ,it can be combinated in series working at random.

Solar collector panel  absorbs through heat pipe evacuated tubes .Heat pipe evacuated tubes insert into the solar collector panel box,heat pipe evacuated tubes absorbs solar energy and convert to be heat and delivery heat by vaporized fluid to  header of heat pipe which inserted into copper cap of the solar collector panel box.And exchange the heat to solar collector panel box. Then vapor becomes fluid back to buttom of heat pipe.And again tubes heat the fluid to be vapor and  the cycle repeats again and again for offering heating all the time till sunset.

Detail Specification of solar collector panel 

1.    solar collector panel box:

     inner box: red copper  38mm; exterior box: aluminum alloy 2mm,aluminum original color or black color are available.

2.    Heat preservation: Rock Wool and Polyurethane 40mm 

3.    Frame: aluminum steel for slop roof with special hooks.

4．Heat pipe: anti-freezing>-35℃

5．Angle of operation:15-90 degree

6.heat pipe vacuum tube: 58*1800mm 15tubes. heat pipe header size 14mm 75mm length.thickness 1mm; body in 8mm and 0.7mm thickness.

7.Hail resistance:25mm

8.Coating of vacuum tube:aluminum alloy/stainless steel/copper.

9.Daily effeciency more than 55%

This solar collector panel with pressurized is easy for assemble.

Following is the steps for quick understand on installation.

		How to install solar collector panel ?
		1.Install the frame first ,see the frame install drawing
		2.Following the steps
		Step1:first install the nylon cap on the bottom track,then screw off the jacket from the cap
		Step2:put the heat conduction liquid on the condenser of heat pipe.
		Step3:Insert the vacuum tube inside the nylon cap
		(be careful:don't touch the vacuum tube on the ground,or it will be broken)
		Step4:Hold the vacuum tube tightly,then insert it inside the opposite hole(copper cap)which
		on the solar collector panel box slowly.
		Step5:Screw the jacket on the nylon cap.

If for the slop roof,we have several hooks would be helpful for the work.

Normally we complete with the simple hooks below：

If it is complicate ,we have other optional hooks.

Support frame design with hooks for slop roof,Different  slop roof would request for different hooks .So when purchasing ,please let me know what’s the construction of slop roof.