20tubes high pressurized compact solar water heater on industries rooftop for anti-rust |
|
Item number |
VODHP-T480S3-20V |
Simple introduction: |
Tank capacity 200Liter, tube number 20pcs. High pressurized hot water supplier Anti-rust Stainless steel even for sea island area Aluminum alloy bracket |
Specification |
|
Tank Volume: |
full water capacity 200L |
Internal tank: | Stainless steel SUS304-2B food grade with thickness 1.2mm |
Outer tank: | Stainless steel SUS 304-2B food grade in 0.4mm |
Heat Insulation layer of solar water heater on industries roof top | 50mm polyurethane foam |
Supporting bracket: | aluminum alloy |
how does a solar water heater Works: |
1.high pressurized compact solar water heater on industries rooftop is compact solar water heater system, solar collector and tank are together installed in one unite. 2. Solar collector adopts high efficiency heat pipe evacuated tube. 3.The selective coating on the inner tubes converts solar energy into heat energy and transfers to the heat pipe by an aluminum fin.The liquid in the heat pipe changes into vapour which rises to the condenser.The heat conducts the water inside the tank and the vapour becomes liquid,returning back to the base of the heat pipe.This continuous circulation again and again. |
Vod solar water heater on industries rooftop Advantage: |
|
Tank is full capacity designed Triple selective coating Cu/SS-AIN evacuated tubes with conduct heat pipe and aluminum fin is 10% higher efficiency than normal single coating tube pipe. Double-layer borosilicate 3.3 glass 1.6MM against hard power impact heat pipe is TU1 copper and working temperature -40~ +260°C Insulation foam layer : foamed with imported material from German, high density in 38kgs/m3, foaming process outlook is smooth . Outer tank steel of solar water heater on industries rooftop is high quality SUS304-2B stainless steel, best choice for against bad water quality and environment area Inner tank steel is SUS304-2B food grade stainless steel, thickness reaches 1.2mm, thicker than market standard for long life time and high pressure. Outer tank cover fixed by aluminum rivet, no risk on fall off arc-argon welding is applied for all fittings, no leakage risk Screws fixed betweeen the tank and bracket are flange sharp, large contact area to be no damage to tank material under big wind force. Support material in aluminum alloy, No rust risk;Safety equipment are installed such as PT valve, vacuum vale, cold water inlet (with one-way valve) ;Intelligent solar water heater on industries rooftop controller is placed in room for monitor and control ,Electric heater as backup heating can help to offer hot water all the time. |
Focus point: | |
Outer tank shell is stainless steel 304-2B ,best solution for anti-rust. Bracket in aluminum alloy makes sure no rust risk. Suitable for back water quality and environment area such as sea island. |
|
Other capacity available |
100L,200L,250L,300L |