150L flat plate homemade solar water heater

If you want to homemade solar water heater ,you must to know and prepared somethings.

How many capacity you want to use?

Usually one person for about 40Liters water per day.But different using hot water habit would lead to different request.

Where is the installation place for homemade solar water heater?

On roof whatever slop or flat roof,but if you are placing in slop roof,you need prepare some hooks for the bracket.

If on the groud,make sure what type of homemade solar water heater it is . Pressurized or passive solar water heater.

If it is pressurized solar water heater,sure no problem to supply hot water on groud.

but if it is passive solar water heater which supply by gravity of the water, you should prepare water pump for push water for shower.

Which position should the homemade solar water heater  placed?

It  depends on your location,if you are in northern hemisphere, face the solar collector absorbing side to south .

If you are in southern hemisphere,face to the north.

What's the best angle for homemade solar water heater?

The best angle for absorbing solar energy depends on your local lattitude.

The lattitude valve plus the 15 degree will be the answer.

What material should i prepare for a homemade solar water heater?

If you do not have existing material,we can supply all material for homemade solar water heater.

Here we take a example how to do a homemade solar water heater.

Take 150L pressurized flat plate solar water heater for example.

For 3-4 persons familing shower use purpose .

We need materials: pressurized solar water heater tank 150L capacity, flat plate solar collector, a multifunctional frame.

Detail Specification:

l  Tank capacity :full water volume 150L

l  Inner Tank made by SUS304-2B food grade thickness 1.2mm

l  Outer tank made by color steel thickness in 0.31mm; color available

l  Insulation in high density polyurethane thickness in 50mm

l  Frame design with 1.5mm galvanized steel with adjustable tube cap

 We should know how this homemade solar water heater works to figure out the best installation way.

flat plate homemade solar water heater is a close loop system which integrated working by storage tank and solar collector .A support is installed to connect tank and solar collector .Flat plate solar collector plays a role of heating device, it transfer the heat to make the storage water hotter and hotter.

Then let's do the homework.

Install the solar water heater frame first,the frame is multi-ways for both slop or flat roof, so whatever situation you meet, it is easy to operate.

If flat roof,we keep the stand of frame to keep a angle for passive pressurized solar water heater. If installed slop roof,just remove the back legs of the frame,and with special hooks to fixed to slop roof.

Then we place the tank onto the frame tank holder where we can fixed the tank with screws,after we place the flat plat solar collector on the frame.

Connect the pipeline between  solar collector and tank for natural water circulation.

Do the pipeline for inlet and outlet hot water.

It is simple to do a homemade solar water heater for your sweet home.

If you take from use, it has very advantage for your confirmtable shower.

l  Storage tank is  full capacity as titled.

l  Flat plate solar collector with blue coating has a less heat emission compare to other coatings such as black chrome ,anodized coating

l  Back side and case of solar collector are in aluminum alloy for long life time space.

l  EPDM for sealing part equipped for solar collector for  against UV and high temperature.

l  Outer tank steel is galvanized steel with with higher Zinc coating than industrial for anti-rust purpose

l  Inner tank  steel is SUS304-2B food grade stainless steel, its thickness reaches 1.5mm, thicker than market normal thickness for high quality anti-rust and longer usage.

l  Outer tank cover is Rivet up to tank body with rivet in avoid fall off by expansion of insulation by hot and cold effect.

l  arc-argon for inner tank is no damage to steel material.

l  Flange Screw for fixing the tank to frame are well protect to the tank and strong fixing ability.

l  Support thickness is 1.5mm galvanized steel. All bar and tube hold are thickened to enhance the anti-wind purpose. End tube holder is adjustable

l  The Tank ports are included all necessary functional design, they are also available for all accessory, special request from customer can be acceptable and customer made after checking by engineer. Ports included PT valve, vacuum vale, cold water inlet (with one way valve), hot water outlet, Magnesium bar, electric heater, sensor port (design for controller

 Our homemade solar water heater have focus points briefly below:

l  Pressurized hot water supply from tank directly

l  Flat plate panel solar collector for easy installed

l  Panel size is special design in 3squre meters for enough energy

If you are doing a big homemade solar water heater project,please also inquiry us for experts instruction from us.