- Mon-Sat:9.00am to 6.00pm
- benchen83@gmail.com
|
100liters heat pipe pressurized solar water heater on rooftop |
|
|
Item number |
VODHP-480C-10V |
|
Simple introduction: |
Tank capacity 100Liter, tube number 10pcs. Close loop system ,heat pipe tube system Design for low latitude area 2-3 persons family White color steel external tank |
|
Specification |
|
|
Tank Capacity: |
100L |
| Internal tank: | SUS304-2B food grade thickness 1.2mm is applied for internal tank |
| Outer tank: | High quality color steel is applied for outer tank, thickness in 0.31mm; |
| Heat Insulation layer |
Heat Insulation is made of polyurethane, thickness in 50mm Frame is made of 1.5mm hot dip galvanized steel with powder coating |
|
Working principle: |
Heat pipe pressurized solar water heater on rooftop is a pressurized solar heating system. System adopts heat pipe evacuated tubes as absorbing collector. High efficiency heat pipe vacuum tube absorbs solar energy from sun and heat pipe transfers heat to the condenser end by its aluminum fins. Condenser indirectly contacts with tank water through a copper cap of tank and it boils water by releasing heat gained from vacuum tube. |
|
Vod Solar Advantage: |
|
|
Tank of solar water heater on rooftop is full capacity designed ,high rate capacity against tubes number. Triple selective coating evacuated glass tubes with heat pipe and aluminum alloy is 10% higher efficiency than normal single coating tube pipe. Aluminum fine is whole piece design better for heat conduct Foaming Insulation between inner and outer tank is special chemical polyurethane which main material imported from German, high density in 38kgs/m3 is applied in our solar water heater on rooftop, finished foam is smooth . Outer tank steel material in galvanized steel with white powder coating, Basement steel is with higher Zinc coating galvanized steel. High resistant against acid and alkali. Inner tank steel material in SUS304-2B food grade stainless steel, its. thickness is 1.2mm, thicker than industrial standard for long life time and high pressure. Outer tank cover is fixed to tank body by aluminum rivet to avoid fall off by expansion of insulation by hot and cold effect. All fittings welding technical in arc-argon machine, it is no damage to steel material. Flange Screw for fixing the tank to frame are well protect to the tank and strong fixing ability. Bracket support is designed for solar water heater on rooftop with thickness 1.5mm galvanized steel with powder coating. All bar and tube hold are thickened to enhance the anti-wind purpose. All possible functions are considered for tank.ank functions are included PT valve, vacuum valve, cold water inlet (with one way valve ), hot water outlet, Magnesium bar, electric heater, sensor port (design for controller). If there is any special request from customer ,we will check with our engineer to see the possibility . Optional controller is available |
|
|
Point attention: |
100L design for single to 3people, small and economic. Tank design with less tubes suitable for hot area . Color steel with higher zinc contents coating for long time usage. |
|
Capacity optional of solar water heater on rooftop |
100L,200L,250L,300L |
