- Mon-Sat:9.00am to 6.00pm
- benchen83@gmail.com
| Simple description: | |
| 200Liter tank with 24tubes design. | |
| Item number: | VODNP-H460C-24V |
| Color steel outer tank shell | |
Detail describtion on thermosiphon solar water heater: |
|
| Tank size: | 200L |
| Inner Tank steel: | SUS304-2B food grade thickness 0.5mm |
| Outer tank shell: | white color steel, thickness in 0.31mm |
| Heat insulation: | 50mm high density polyurethane |
| Support for tank and tube: | 1.5mm galvanized steel with powder coating ,green color or other colors |
Working principle: |
|
| Color steel thermosiphon solar water heater is non-pressurized system design tank with color steel. Solar collector tubes absorbing the heating energy to heat the cold water in collector tubes, then hot water will rising to exchange the cold water in main tank .Cold water gets down to the tube for heating again and go up for exchange again. This circulation will works until sun down. |
Vod Solar details |
|
|
Full tank capacity is offered. Collector tubes are made of high quality glass ,double glass with vaccum inside keeps low heat lose.The three target coating of glass absorbs about 10% higher energy than normal coating. Single tube heating more than 2kgs higher than market selling. Insulation foam is made of polyurethane and high density in 38kgs/m3, foaming outlook is smooth and nice looking. Outer material of tank is with higher zinc coating galvanized steel. Inner tank steel thickness is 0.5mm, thicker than market for high quality anti-rust and longer usage. Punched holes for Silicone sealing are forward outside ,cutting position do not contact with water in order to avoid any rust We rivet up the tank cover with rivet to main tank in order to avoid falling off by expansion of insulation by hot and cold effect. The welding of thermosiphon solar water heater fittings is arc-argon, it is a protection for steel. We adopt the flange screw for fixing main tank to frame. Well protect the tank and strong fixing ability. Our thermosiphon solar water heater frame adopts 1.5mm galvanized steel. Support bars and tube hold are thickened to enhance the anti-wind purpose. All ports of tank are well considered to meet the demands of customers, they are available for all accessory, special request from customer can be acceptable and customer made after checking by engineer. |
|
| Remark: | accessory |
| optional: | assistant filling tank, electric resistant, controller, magnesium bar |
| Small Noted: | Out tank color of solar water heater can be white color ,also can be other colors design. Different place customer have different favor for color. We can do according your request. |
| Data for delivery and loading use: |
Package size:0.7CBM Gross Weight:98KGS |
VODNP-H460C color steel thermosiphon solar water heater series :
|
Item No. |
Capacity /L |
Solar Vacuum Tube |
Aperture |
Container Loading Sets |
|||||
|
Tank |
Tube |
System |
Tube No. |
Tube size/mm |
Area/m2 |
20GP |
40GP |
40HQ |
|
|
VODNP-H460C-10V |
80 |
20 |
100 |
10 |
Φ58 * 1800 |
0.65 |
71 |
137 |
168 |
|
VODNP-H460C-12V |
100 |
24 |
124 |
12 |
Φ58 * 1800 |
0.97 |
67 |
125 |
153 |
|
VODNP-H460C-15V |
126 |
30 |
156 |
15 |
Φ58 * 1800 |
0.12 |
55 |
103 |
126 |
|
VODNP-H460C-18V |
150 |
36 |
186 |
18 |
Φ58 * 1800 |
1.46 |
44 |
85 |
104 |
|
VODNP-H460C-20V |
160 |
40 |
200 |
20 |
Φ58 * 1800 |
1.62 |
40 |
78 |
96 |
|
VODNP-H460C-24V |
200 |
48 |
248 |
24 |
Φ58 * 1800 |
1.94 |
34 |
68 |
82 |
|
VODNP-H460C-30V |
250 |
60 |
310 |
30 |
Φ58 * 1800 |
2.43 |
27 |
54 |
65 |
|
VODNP-H460C-36V |
300 |
72 |
372 |
36 |
Φ58 * 1800 |
2.91 |
19 |
39 |
47 |
